Pompe 3TSS et 4TSS
solaire
Ces produits sont
principalement utilisés dans la région sèche pour l'irrigation de l'agriculture,
il peut être utilisé pour l'eau potable et eau vive. La condition de vie
pourrait être beaucoup améliorée. Il peut également être utilisé pour des
fontaines.
1.APPLICATION
AREA:
This project products are
mainly used in dry region for irrigation of agriculture, It can be used for
drinking water and
living water. The living
condition could be much improved. It also can be used for fountains.
2.MATERIAL
OF PARTS:
Outlet: stainless steel
Pump body: stainless steel
Motor body: stainless steel
Bearing: C&U
3.ADVANCED
TECHNOLOGY:
1.Application
innovation
Compared with the
traditional alternating current machine, the efficiency is improved 25% by the
permanent magnetism, direct current, brushless, non-sensor motor.
2.Technics
innovation
Adopt double plastic package
for rotor and stator, motor insulation≥300MΩ, the motor security was much
improved.
3.Structure
innovation
Oil filling, convenient
installation and environmental protection
4.HIGHLIGHTS
a.Energy-saving and
environment-protected green products
b.High technique products
adopting MPPT and DSP chip technique.
c.100% copper wire, cold-rolled
silicon steel sheet
d.CE certificate
e.Advanced three phase
brushless DC motor
g.3 years warranty
 |
5.PRINCIPLE OF
OPERATION:
Solar panel collects
sunlight→DC electricity energy → solar controller(rectification,stabilization,amplification,filtering)→available
DC electricity→(charge the batteries)→pumping water
6.ADVANTAGES OF
SOLAR PUMP SYSTEM:
A.It is easier and more
widely used than any other dynamoelectric driven pumps.
B.It is more economical and
more environmentally friendly.
7.MODEL SELECTION:
a.The power of solar panel =
power of pump ×1.3
The voltage of solar panel =
the voltage of pump
The controller should be
matched
b.Select the batteries
according to the following formulas:
The use hour of battery =
The battery capacity ÷(the
machine power÷the battery voltage)×0.6 For example,the machine power is 200W, the
battery
capacity is 100AH,the
voltage is 12V,and the battery is fully charged,then the use hour is:100÷(200÷12)×0.6=3.6hours
c.The battery capacity=
--------------------------------------------------------------------
Pompe 3TSS/4TSS:
Paramètre du système:
Caractéristiques:
------------------------------------------------------------------------
Montage des Controls de la pompe:
